PMBPROD293E — Create composite laminates using vacuum-assisted closed-moulding processes

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate PMBPROD293E free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for PMBPROD293E must cover

31 assessable components: 4 elements (17 performance criteria), 1 performance evidence and 10 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Check work requirements

1.1Identify work requirements from production plan or request, or job specifications
1.2Check product, materials and equipment meet requirements for job
1.3Recognise mould-tooling design requirements and compare with typical requirements
1.4Identify and perform housekeeping tasks in preparation for work to be undertaken
1.5Perform pre-operational checks including checking for and acting on hazards

2 Check process set-up

2.1Check safety equipment is in position and working
2.2Check moulds, vacuum ports, closures and fittings, and vacuum bag or counter-mould, for operational readiness
2.3Check moulds for cracks, chips, marks and cleanliness in preparation for use
2.4Check materials, including fibre preforms, resins, additives and release agents, are correct against job specifications
2.5Complete pre-startup checks for air leaks, vacuum pump operation, and liquid resin delivery tubes in readiness for operation

3 Operate equipment

3.1Start equipment safely and correctly when required
3.2Check process is operating according to equipment specifications in relation to resin flow and exotherm to meet job requirements
3.3Monitor and maintain supply of materials to support operation of equipment
3.4Accurately complete logs and records

4 Respond to process variations in accordance with procedures

4.1Recognise and log process control variances and their issues
4.2Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
4.3Accurately maintain records and logbooks

Performance evidence

create composites laminates using vacuum-assisted closed-moulding processes at least once to meet work requirements, and including preparation of workplace production moulds, fibre preforms, prepregs, resins, additives and release agents to process specifications.

Knowledge evidence

functions of vacuum-assisted closed-moulding equipment
principles of operation of the equipment in use at the workplace
polymer thermosetting resins and reinforcements typically in use
composite laminate production workflow sequences and materials demand
the criteria for overall process or equipment readiness for the process or equipment being used
key variables that may impact product quality or production output, including: vacuum-assisted closed-moulding equipment conditions, production rate, curing time and conditions
typical quality standards at each stage of production
typical process and product problems, including early warning signs, possible causes and corrective actions
organisational procedures relevant to the work environment or job role, including procedures for the emergency shutdown of equipment
hazards that may arise in the job or work environment, and: their possible causes, potential consequences, appropriate risk controls.

Foundation skills

Numeracy: Numeracy skills to interpret technical information and equipment readings.
Reading: Reading skills to interpret specifications and workplace procedures.
Writing and oral communication: Writing and oral communication skills to record and report on vacuum-assisted closed-moulding equipment operations.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing PMBPROD293E

What does an assessment tool for PMBPROD293E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for PMBPROD293E needs to address all 31 unit components: 4 elements with 17 performance criteria, 1 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for PMBPROD293E?

Auditori pulls the current release of PMBPROD293E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for PMBPROD293E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing PMBPROD293E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of PMBPROD293E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your PMBPROD293E assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate PMBPROD293E free