PMBPROD247E — Create composite laminates using hand lay-up techniques

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate PMBPROD247E free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for PMBPROD247E must cover

27 assessable components: 4 elements (13 performance criteria), 1 performance evidence and 10 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Check work requirements

1.1Identify requirements from job specifications
1.2Perform housekeeping tasks to prepare for work to be undertaken
1.3Perform pre-operational checks including checking for and acting on hazards

2 Set up mould and materials

2.1Set up mould ready for production
2.2Ensure materials are available in form and quantities required
2.3Ensure safety equipment is available and fit for use

3 Lay-up composites by hand

3.1Apply materials to mould according to specifications
3.2Ensure output meets job specifications and quality standards
3.3Work efficiently to minimise scrap and trim
3.4Clean equipment and work area according to equipment specifications and workplace procedures

4 Respond to process control variances

4.1Recognise and log process control variances and their causes
4.2Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
4.3Maintain records and logbooks

Performance evidence

create composite laminates using hand lay-up techniques at least once to meet job specifications.

Knowledge evidence

principles of hand lay-up techniques in relation to the production of composites laminates
types of composite laminates, including: • gel coats • resins • fibre reinforcements
types of materials, tools and equipment to meet job specifications
set-up procedures for, and indicators of, mould readiness for production
methods of manual application of composite materials
production workflow sequences and materials demand
key variables that may affect product quality and production output, including: • the impact of resin-to-fibre ratios on product outputs • mould conditions • ambient temperature • air flow and ventilation rate • viscosity of resin • age of resin mix and pot-life of mix
typical process and product problems, as listed below, including early warning signs, possible causes and corrective actions: • cracks, dents or imperfections in the mould • incorrect resin ratios • contamination of materials • shifting of fibres before the resin is laid • stacking of fibre and resin sequence problems • product problems including voids, poor surface finish, colour contamination and release from mould damage
organisational procedures relevant to the work environment job or role
hazards that may arise in the job or work environment, and: • their possible causes • potential consequences • appropriate risk controls.

Foundation skills

Numeracy: Numeracy skills to interpret technical information.
Reading: Reading skills to interpret specifications and workplace procedures.
Writing and oral communication: Writing and oral communication skills to record and report on composite laminate operations.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing PMBPROD247E

What does an assessment tool for PMBPROD247E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for PMBPROD247E needs to address all 27 unit components: 4 elements with 13 performance criteria, 1 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for PMBPROD247E?

Auditori pulls the current release of PMBPROD247E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for PMBPROD247E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing PMBPROD247E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of PMBPROD247E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your PMBPROD247E assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate PMBPROD247E free