PMBPREP304E — Set a die for injection moulding production

1 Prepare to change dies

• 1.1Determine when changeover will be required, and plan requirements for die change
• 1.2Prepare dies and all required cores, parts, tools and equipment related to changing dies according to plan
• 1.3Prepare moulding machine for shutdown and die removal according to plan
• 1.4Take last-off samples from machine to inform die reports
• 1.5Shut down machine according to machine specifications
• 1.6Prepare machine for changeover according to workplace procedures
• 1.7Plan a safe die removal process that meets workplace safety standards

2 Change dies

• 2.1Remove, clean and store die according to workplace procedures
• 2.2Assess die to establish if corrosion protection is required
• 2.3Attach replacement die, ensuring that locating devices and marks are matched and securing devices are installed and tightened according to specifications

3 Set dies

• 3.1Set machine conditions for new die according to machine specifications
• 3.2Start up machine according to workplace procedures
• 3.3Run machine and die through dry cycle according to workplace procedures
• 3.4Check installation and operation of die against product quality specifications and expected operation standards
• 3.5Check a first-off sample for compliance with required standards
• 3.6Fine-tune settings and other production variables to improve output compliance
• 3.7Ensure workplace documentation is up-to-date, including noting any equipment variances between actual production and documented set-up conditions

4 Anticipate and solve process control variances

• 4.1Recognise existing or potential process control variances and their causes
• 4.2Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
• 4.3Monitor process control variances and corrective actions taken until resolved
• 4.4Identify possible system or process improvements and make recommendations to relevant personnel

What does an assessment tool for PMBPREP304E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for PMBPREP304E needs to address all 34 unit components: 4 elements with 21 performance criteria, 1 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for PMBPREP304E?

Auditori pulls the current release of PMBPREP304E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for PMBPREP304E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing PMBPREP304E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of PMBPREP304E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.