PMAOPS369 — Operate and troubleshoot drain and vent systems

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate PMAOPS369 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for PMAOPS369 must cover

52 assessable components: 4 elements (23 performance criteria), 1 performance evidence and 23 knowledge evidence requirements, plus 5 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Operate drain and vent systems according to procedures

1.1Receive and give shift handover
1.2Communicate with personnel to identify and coordinate work requirements
1.3Identify, control and report system hazards
1.4Check for recent work undertaken on system and address outstanding and incomplete work
1.5Perform routine checks, and complete logs and documentation
1.6Adjust system according to operational parameters

2 Identify and respond to abnormal situations during operation

2.1Monitor field system, data and instrumentation to ensure system operates according to specification
2.2Identify actual and developing situations that may require action
2.3Take action to remedy abnormal situations
2.4Complete required documents outlining abnormal situation management and corrective action taken

3 Shut down and prepare drain and vent systems for maintenance

3.1Shut down system according to operating procedures
3.2Identify, control and report shutdown hazards
3.3Monitor shutdown and identify abnormal situations that may require action
3.4Take action to remedy abnormal situations according to operating procedures
3.5Shut down and changeover duty and standby equipment according to operating procedures
3.6Isolate system from energy sources

4 Prepare and start up drain and vent systems

4.1Check for recent work undertaken on system and address outstanding and incomplete work
4.2De-isolate and prepare system to be returned to standby or service
4.3Complete pre-start checks according to workplace procedures
4.4Start up system according to operating procedures
4.5Identify, control and report startup hazards
4.6Monitor startup and identify abnormal situations that may require action
4.7Take action to remedy abnormal situations according to operating procedures

Performance evidence

There must be evidence the candidate has completed the tasks outlined in the elements and performance criteria of this unit: at least 2 times, each in a separate work context.

Knowledge evidence

drain and vent system items, functions, troubleshooting techniques, and potential for overpressure
principles of operation
operating parameters and integrity limits, and product specifications and tolerances, including temperature, pressure, flow and oxygen content
workplace procedures and correct methods of starting, stopping, operating, controlling and isolating and de-isolating the systems
emergency shutdown procedures
process control philosophies and strategies
interactions between plant items and processes
equipment safeguarding relevant to the systems and area
process-specific physics and chemistry to the level of being able to provide an overview of the science of the drain and vent systems
drain and vent system abnormal situations and required action, including but not limited to:
variation or loss of supply
unstable control of pressure, temperature, level and flows
control equipment failure inclusive of incorrect valve status
system trips
change in atmospheric conditions (including rain, temperature, wind, lightning and calm weather)
poor quality from test results
analyser inaccuracy or malfunction
hierarchy of control
drain and vent system hazards:
possible causes
potential consequences
appropriate risk controls
reporting and escalation procedures

Foundation skills

Learning skills: to follow instructions, monitor process and select appropriate procedure.
Numeracy skills: to monitor field data, instrumentation and process parameters.
Oral communication skills: to liaise and coordinate with team members and control-room operator.
Reading skills: to follow written procedures and documentation.
Writing skills: to complete workplace documentation.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing PMAOPS369

What does an assessment tool for PMAOPS369 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for PMAOPS369 needs to address all 52 unit components: 4 elements with 23 performance criteria, 1 performance evidence requirements, 23 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for PMAOPS369?

Auditori pulls the current release of PMAOPS369 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for PMAOPS369 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing PMAOPS369 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of PMAOPS369, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your PMAOPS369 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate PMAOPS369 free