MSMRV372 — Rough-in and fit-off recreational vehicle water systems
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MSMRV372 must cover
40 assessable components: 6 elements (22 performance criteria), 1 performance evidence and 17 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to rough-in and fit-off water systems
- 1.1Identify water system rough-in and fit-off requirements from job instructions
- 1.2Select and check all required tools and equipment are ready to use
- 1.3Gather water system and other items required by job specifications, and check they meet quality requirements and are ready for installation
- 1.4Identify hazards and hazard controls and check the hazard controls are in place and operating
- 1.5Check the recreational vehicle and work area are ready for roughing- in and fitting-off the water system
2 Install tanks
- 2.1Confirm the tank locations from the job instructions
- 2.2Install sensors to the tanks according to workplace procedures
- 2.3Install tank supports, brackets and tanks according to workplace procedures
- 2.4Check finished installation according to job instructions and quality requirements and rectify any deficiencies
3 Rough-in water systems
- 3.1Run pipes from water sources to fitting-off locations as specified in pipe plans
- 3.2Cut pipes to length, install joiners and connectors and fasten pipes in position according to workplace procedures
- 3.3Connect pipes to water sources.
4 Fit-off water systems
- 4.1Correctly position and fasten the water system fittings according to job specifications and manufacturer’s instructions
- 4.2Fit and seal drainage pipes to fit-off items to ensure water tightness
5 Test water systems
- 5.1Test the mains water inlet and water pump, and rectify any leaks
- 5.2Pressure-test pipes and water system fittings, and rectify any leaks
- 5.3Test drains and rectify any faults or leaks
6 Complete the rough-in and fit-off according to workplace procedures
- 6.1Clean up the recreational vehicle in readiness for the next task
- 6.2Clean up the work area, identify items for recycling and dispose of waste
- 6.3Identify, tag and report any damage to equipment and tools
- 6.4Check, clean and do routine maintenance on equipment and tools and store them and unused materials
- 6.5Complete task outcome documentation
Performance evidence
- There must be evidence that the candidate has completed the tasks set out in the elements and performance criteria and has demonstrated the ability to rough-in and fit-off the water system of a recreational vehicle on at least three occasions, including at least two different layouts of water system.
Knowledge evidence
- requirements relevant to the performance criteria of:
- AS/NZS 5601.2 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
- AS/NZS 3001 Electrical installations - Transportable structures and vehicles including their site supplies
- the Road Vehicle Standards Act 2018
- Australian design rules
- types of recreational vehicle water systems and manufacturer’s installation and use instructions for them
- which hand and power tools and equipment to use when roughing- in and fitting-off recreational vehicle water systems
- organisational procedures for:
- roughing- in and fitting-off recreational vehicle water systems
- communication and reporting
- environmental protection and sustainability, including adhesives, dust, noise and waste
- quality assurance
- work health and safety, including personal protective equipment
- work planning
- hazards that might arise in the work environment and their controls
- the most common issues that can arise when roughing- in and fitting-off recreational vehicle water systems and how to avoid and respond to them
- how to identify if recreational vehicle water systems are roughed-in and fitted-off correctly.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MSMRV372
What does an assessment tool for MSMRV372 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MSMRV372 needs to address all 40 unit components: 6 elements with 22 performance criteria, 1 performance evidence requirements, 17 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MSMRV372?
Auditori pulls the current release of MSMRV372 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MSMRV372 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MSMRV372 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MSMRV372, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MSMRV200 — Complete basic recreational vehicle manual assembly tasks
- MSMRV201 — Source and use recreational vehicle industry information
- MSMRV367 — Fabricate frame structures
- MSMRV368 — Install frame structures
- MSMRV369 — Install recreational vehicle floors and floor coverings
- MSMRV370 — Build recreational vehicle furniture
- MSMRV371 — Install recreational vehicle furniture
- MSMRV373 — Rough-in and fit-off recreational vehicle extra-low-voltage electrical systems
- MSMRV374 — Assemble and install recreational vehicle slide-outs
- MSMRV375 — Complete installing recreational vehicle walls and roofs
- MSMRV376 — Install recreational vehicle windows and doors
- MSMRV377 — Install recreational vehicle external items
Your MSMRV372 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MSMRV372 free