Auditori
Get started

MSMPMC322 — Deliver concrete to site

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MSMPMC322 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MSMPMC322 must cover

53 assessable components: 5 elements (21 performance criteria), 14 performance evidence and 18 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Load agitator

  • 1.1Check job requirements
  • 1.2Position agitator for loading
  • 1.3Load agitator with correct concrete batch
  • 1.4Check and action any special requirements
  • 1.5Check that slump is to specification and make necessary adjustments

2 Deliver concrete

  • 2.1Deliver concrete without delay
  • 2.2Position vehicle or agitator as required by safety needs and if practical customer requirements
  • 2.3Report breakdowns or lengthy delays en route to relevant person
  • 2.4Maintain product quality as per requirements and procedures

3 Conform to site protocols

  • 3.1Check access to site with customer
  • 3.2Assess site conditions and enter in a manner suited to the conditions, load and site requirements
  • 3.3Mix concrete on site according to quality requirements
  • 3.4Discharge concrete as required by customer
  • 3.5Wash down chutes and agitator in the area designated by the customer
  • 3.6Complete all records

4 Rectify routine problems

  • 4.1Identify and rectify faults and equipment failure
  • 4.2Maintain records and log books of equipment operations
  • 4.3Identify non-routine problems and report to designated person

5 Control hazards

  • 5.1Identify concrete delivery hazards
  • 5.2Assess the risks arising from those hazards
  • 5.3Implement measures to control those risks

Performance evidence

  • delivered concrete to site using an agitator or similar on at least 1 occasion, including:
  • monitoring the following key variables to ensure product integrity and conformance to specification:
  • slump
  • amount of added water
  • delays and breakdowns
  • quantity and mix of materials
  • site conditions and access
  • equipment maintenance and repair needs
  • recognising possible causes of the following routine problems:
  • incorrect quantity of materials
  • contaminated materials and additives
  • wrong raw materials and additives
  • incorrect mixing time and technique
  • equipment faults, damage, failure.

Knowledge evidence

  • AS1379: Specification and supply of concrete or equivalent
  • principles of mixing concrete for on-site delivery
  • equipment, including:
  • start-up, operation and shutdown procedures
  • limitations and impact on blending and mixing efficiency and effectiveness
  • the potential effects of equipment operation in relation to quality of product
  • slump measurement
  • customer service
  • relevant road rules
  • safety protocols for on-site delivery
  • waste disposal requirements
  • relationship between mixing time, water-cement ratio and product quality
  • the potential effects of variations in raw materials and processes in relation to quality of product
  • routine problems and factors which may affect product quality or production output, their probable causes and relevant corrective actions
  • delivery hazards and:
  • their possible causes
  • potential consequences
  • risk control procedures.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MSMPMC322

What does an assessment tool for MSMPMC322 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MSMPMC322 needs to address all 53 unit components: 5 elements with 21 performance criteria, 14 performance evidence requirements, 18 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MSMPMC322?

Auditori pulls the current release of MSMPMC322 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MSMPMC322 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MSMPMC322 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MSMPMC322, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MSMPMC322 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MSMPMC322 free