MSFFM3024 — Construct jigs and fixtures

1 Identify the purpose of the jig or fixture

• 1.1Purpose of the jig or fixture, and the equipment it is to be used on is established
• 1.2Proposed service life of jig or fixture is established
• 1.3Tolerances allowed are identified
• 1.4Materials for jig construction are established
• 1.5Quality requirements for each stage of the construction process are identified

2 Plan jig or fixture construction

• 2.1Plan of proposed jig or fixture is produced
• 2.2Approval of design is gained through workplace procedures
• 2.3Steps or stages in production are planned, noting check points for measurements and tests

3 Collect materials and equipment

• 3.1Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
• 3.2Sufficient materials to complete the project are assembled ready for use
• 3.3Suitable work area is selected
• 3.4Hand and/or power tools are identified and checked for serviceability and assembled in work area
• 3.5Appropriate equipment required is identified and checked for serviceability

4 Construct the jig or fixture

• 4.1Production plan is followed to construct the jig or fixture
• 4.2Tools and equipment are used in accordance with workplace procedures
• 4.3Quality checks are conducted at the identified points
• 4.4Modifications are identified and recommended within workplace procedures
• 4.5Modifications to the plan are documented and followed
• 4.6Jig or fixture is checked for fitness for purpose

5 Finalise operation and maintain equipment

• 5.1Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
• 5.2Machinery is cleaned and left in a safe mode
• 5.3Faulty and/or defective equipment is tagged and reported in accordance with workplace practices
• 5.4Unused hardware is collected and stored for re-use or disposal following workplace procedures
• 5.5Waste and scrap materials are dealt with following workplace procedures

What does an assessment tool for MSFFM3024 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MSFFM3024 needs to address all 38 unit components: 5 elements with 24 performance criteria, 9 performance evidence requirements, 5 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MSFFM3024?

Auditori pulls the current release of MSFFM3024 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MSFFM3024 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MSFFM3024 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MSFFM3024, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.