MSFFL3077 — Prepare subfloors for resin flooring systems

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MSFFL3077 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MSFFL3077 must cover

51 assessable components: 6 elements (19 performance criteria), 8 performance evidence and 24 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for the work

1.1Identify and follow work health and safety, legislative, and organisational requirements
1.2Correctly interpret work orders and confirm job requirements
1.3Select and check tools and equipment for suitability, serviceability and safety prior to use
1.4Plan application with respect to order of repairs, material consumption, height of coves boundaries, joints and exit points

2 Prepare subfloors

2.1Inspect condition of the substrate and confirm suitability for required repair consistent with supplier recommendations
2.2Select and safely use equipment and machinery for required cutting and removal
2.3Remove dust and debris from the substrate prior to application, and control sources

3 Set out work area

3.1Establish mixing area in suitable area and select surface protection measures and apply to areas not being coated
3.2Check materials for correct quantities, undamaged packaging and no obvious discrepancies in colour and viscosity
3.3Select suitable masking tape and correctly apply to mark off edges, transitions and other floor boundaries

4 Prepare subfloor repair system

4.1Correctly fit personal protection equipment (PPE) before coating materials are handled
4.2Accurately measure and mix component quantities in accordance with supplier instructions.

5 Apply subfloor repair system

5.1Apply mixed priming and repair materials in accordance with supplier application notes
5.2Manipulate, measure and cut materials using appropriate tools and in accordance with project requirements
5.3Check repair applications for quality at each stage and rectify any deficiencies

6 Complete housekeeping

6.1Check, clean and store tools and equipment in accordance with workplace procedures
6.2Seal and store unused materials in accordance with supplier instructions
6.3Clean work area and dispose of rubbish safely
6.4Accurately complete required workplace and project documentation

Performance evidence

There must be evidence the candidate has completed the tasks outlined in the elements and performance criteria of this unit, and:
completed the following:
2 patch repairs – patch chipped concrete and static crack repairs to feather edge
2 floor levelling repairs – ramp at door transition and falls to drain
2 in-fills – rebuild expansion joint and install a floor waste
2 crack repairs – chase out, overfill, grind back and infill, sawcut and caulk sealant
2 coves – install arrowhead coving system and smooth edge cove
1 primer to strengthen weak or porous substrate.

Knowledge evidence

There must be evidence the candidate has knowledge of:
key aspects of state or territory legislation, regulations, standards and codes of practice, including individual technician rights and obligations relating to:
workplace health and safety
consumer law
environmental protection and sustainable use of materials
how to access supplier instructions
mathematical procedures for estimation and measurement, including calculation of area, volumes and use of ratios for mixing
types, uses and limitations of tools and equipment used in substrate repair
characteristics and requirements of suitable subfloor preparation, including different methods and products used to profile, repair, prime and clean
the features and layout of an effective mixing area
taping techniques to protect surfaces that aren’t to be coated, including walls, edges, transitions and boundaries on the floor
personal protective equipment (PPE) and correct usage
techniques for the following, the types of problems that may occur and how to avoid and respond:
measuring out and mixing substrate repair systems, including pigment, fillers and/or aggregate and stir-in additives
applying floor levelers, including brushing, rolling, raking and troweling
identifying when and how to apply a suitable resin primer to strengthen up a weak or porous substrate
applying in-fills, including brushing, trowelling and finishing
applying dynamic crack repair systems, including concrete cutting, trowelling and caulking
applying joint repair systems, including concrete cutting, jackhammering, trowelling and caulking
applying coving, including brushing, trowelling, coving and finishing
quality indicators for repaired substrate
cleaning and storage procedures for PPE, tools, equipment and unused materials
disposal procedures for waste materials
requirements and protocols for recording, reporting and maintaining workplace records and information.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MSFFL3077

What does an assessment tool for MSFFL3077 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MSFFL3077 needs to address all 51 unit components: 6 elements with 19 performance criteria, 8 performance evidence requirements, 24 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MSFFL3077?

Auditori pulls the current release of MSFFL3077 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MSFFL3077 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MSFFL3077 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MSFFL3077, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MSFFL3077 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MSFFL3077 free