MEA201 — Remove and install miscellaneous aircraft electrical hardware/components
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEA201 must cover
22 assessable components: 2 elements (8 performance criteria), 4 performance evidence and 10 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Remove aircraft electrical hardware
- 1.1System is rendered safe and prepared in accordance with the applicable maintenance manual and isolation tags are fitted, where necessary, to ensure personnel safety
- 1.2Removal of electrical hardware is carried out in accordance with the applicable maintenance manual observing all relevant work health and safety (WHS) requirements
- 1.3Required maintenance documentation is completed and processed in accordance with standard enterprise procedures
- 1.4Removed components are tagged, packaged or discarded in accordance with specified procedures
2 Install aircraft electrical hardware
- 2.1Electrical hardware components to be installed are checked to confirm correct part numbers, modification status, serviceability and shelf life
- 2.2Physical installation of electrical hardware is carried out in accordance with the applicable maintenance manual
- 2.3System is reinstated to correct physical condition in preparation for testing, as necessary
- 2.4Required maintenance documentation is completed and processed in accordance with standard enterprise procedures
Performance evidence
- the preparation and termination of electrical cables to aircraft industry standards, using crimping techniques, soldering techniques and solder sleeves joints
- the correct interpretation of aircraft wire markings, terminal block identification and plug/socket pin numbering systems
- inspection of electrical looms and harness pre and post-removal and installation to ensure minimum bends are maintained, cable is not in tension, plugs are correctly aligned, security of route ensures no chaffing of insulation, adequate clipping and cable ties have been utilised and construction complies with aircraft industry standards
- positive identification of miscellaneous electrical hardware and/or components in all aircraft systems.
Knowledge evidence
- component attachment methods
- connection of hardware and plugs
- application of relevant WHS practices
- the use of approved maintenance documentation and aircraft publications relating to miscellaneous aircraft electrical hardware and components
- electrical wiring used in aircraft and wire marking
- plug/socket pin numbering and terminal block identification
- cable and loom installation requirements
- crimping tools and crimp terminals
- soldering techniques and the use of solder sleeve joints
- electrical fundamentals.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEA201
What does an assessment tool for MEA201 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEA201 needs to address all 22 unit components: 2 elements with 8 performance criteria, 4 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEA201?
Auditori pulls the current release of MEA201 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEA201 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEA201 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEA201, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEA107 — Interpret and use aviation maintenance industry manuals and specifications
- MEA111 — Perform administrative processes to prepare for certification of civil aircraft maintenance
- MEA112 — Plan and implement civil aircraft maintenance activities
- MEA113 — Supervise civil aircraft maintenance activities and manage human resources in the workplace
- MEA116 — Apply work health and safety procedures at supervisor level in aviation maintenance
- MEA117 — Apply self in the aviation maintenance environment
- MEA118 — Conduct self in the aviation maintenance environment
- MEA119 — Perform administrative processes to prepare for certification of civil aircraft A level line mainten
- MEA142 — Manage self in the aviation maintenance environment
- MEA148 — Apply mathematics and physics in aviation maintenance
- MEA154 — Apply work health and safety practices in aviation maintenance
- MEA155 — Plan and organise aviation maintenance work activities
Your MEA201 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEA201 free