CPPSSI5051 — Conduct identification surveys

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate CPPSSI5051 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for CPPSSI5051 must cover

27 assessable components: 4 elements (15 performance criteria), 1 performance evidence and 11 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine survey requirements.

1.1Conduct a search on legislative requirements to obtain survey information relating to boundary dimensions, design information, land title information and topographic features.
1.2Locate survey marks from survey plan and establish position of parcel of land corners.
1.3Mark the boundary with offset lines and use line marks on long or obstructed boundaries as required.
1.4Use monumented and non-monumented occupations to establish an azimuth parallel to street boundary.
1.5Adopt assumed azimuth to enable completion of field survey and calculations and make required adjustments to swing onto azimuth.
1.6Calculate azimuth derived from marks at opposite extremities of survey.
1.7Interpret relationship between alignment marks to determine relevant boundaries shown in plans.

2 Meet local and state/territory government regulatory requirements.

2.1Meet re-mark survey and siting requirements for local government area.
2.2Adhere to relevant survey regulations relating to supervision and accuracy of surveys, field procedures, and survey searching.
2.3Prepare field notes according to legislative requirements.

3 Mark-out and calculate identification survey.

3.1Establish azimuth and calculate boundaries using occupations and monuments or reference marks.
3.2Calculate position of improvements in relation to boundaries using industry-accepted methods.
3.3Apply appropriate validation methods to verify positioning of all placed marks and accuracy of data.

4 Prepare survey report.

4.1Prepare clear and concise survey report and related sketches suitable to accompany development application.
4.2Incorporate physical constraints and environmental impacts of development into report.

Performance evidence

undertaking an identification survey for two different surveying projects: one project must be for a greenfield site, one project must be for additions or renovations on an urban site.

Knowledge evidence

accuracy and precision requirements for cadastral surveying data
purpose of monuments in marking lines
data capture and set-out methodologies used in surveying
data reduction techniques
measurements and computations relating to length, angle, elevation and area
methods for setting up and calibrating surveying equipment
possible community issues and repercussions relating to permits
reference and coordinate systems for surveying data, including Australian Height Datum and Map Grid of Australia
submission process for local government approvals
legislative requirements and industry standards relating to cadastral surveying and local government planning requirements
aspects of land and planning law impacting on surveying tasks: common law title, community title, set-back requirements, strata title, Torrens title system, easements.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing CPPSSI5051

What does an assessment tool for CPPSSI5051 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPPSSI5051 needs to address all 27 unit components: 4 elements with 15 performance criteria, 1 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPPSSI5051?

Auditori pulls the current release of CPPSSI5051 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPPSSI5051 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPPSSI5051 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPPSSI5051, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your CPPSSI5051 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate CPPSSI5051 free