CPCPMS3031 — Fabricate and install steel pressure piping

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate CPCPMS3031 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for CPCPMS3031 must cover

27 assessable components: 4 elements (12 performance criteria), 8 performance evidence and 7 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Identify installation requirements.

1.1Access, read and determine steel pressure pipe installation requirements from job specifications, relevant Australian Standards, codes, manufacturer’s specifications and jurisdictional requirements.
1.2Identify and apply workplace policies and procedures, work health and safety (WHS) and environmental requirements.

2 Prepare for work.

2.1Create a materials list and collect materials.
2.2Select and check serviceability of appropriate tools, equipment and personal protective equipment (PPE).

3 Fabricate, install and test pipe system.

3.1Set out pipework configuration.
3.2Perform installation of fixings and supports to manufacturer requirements, job plans, specifications and workplace requirements.
3.3Fabricate and joint pipe system according to job plans, specifications and manufacturer requirements for mechanical type joints.
3.4Perform installation of pipe system in specified location without damage or distortion to pipework or surrounding environment or other services.
3.5Perform testing of pipe system.
3.6Complete documentation according to relevant regulatory requirements and or workplace requirements.

4 Clean up.

4.1Clear the work area, and dispose of, reuse or recycle materials in accordance with state and territory legislation and workplace policies and procedures.
4.2Clean tools and equipment, check for serviceability and report any damage, and store and secure according to workplace procedures.

Performance evidence

applying pipe cutting and welding skills by using oxy-acetylene and arc welding equipment for piping up to DN50 and must include:
butt welding a pipe joint in DN40 piping in the fixed horizontal position
welding DN40 and 50 mild steel branch joints
constructing a DN80 header with DN20, 40 and 50 branch joints using the oxy-acetylene method
welding 50 mm and 80 mm flanges to mild steel pipe
welding blank ends into DN80 mild steel pipe
fabricating, installing and testing a DN40 steel pipeline from a supply point to an outlet, incorporating two changes of direction with one position butt welded with oxy welding, plus an arc welded flange incorporating a branch for testing purposes
testing completed task to ensure required pressure and the soundness of all joints within the system.

Knowledge evidence

the characteristics and the application of approved materials and components for the fabrication and installation of pressure piping
processes, procedures and techniques of installation of steel pressure piping
processes, procedures and techniques of calculating material quantities
processes, procedures and techniques of pressure, flow rates, temperature requirements and properties of conveyed materials including cutting and welding gases, mechanical joint systems and fittings with variable diameters up to DN100, steel pipes, threaded pipe fittings, weldable pipe fittings
how to access relevant information, including codes and standards
tools, materials and equipment used to fabricate and install steel pressure piping
work health and safety (WHS) requirements to fabricate and install steel pressure piping

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing CPCPMS3031

What does an assessment tool for CPCPMS3031 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCPMS3031 needs to address all 27 unit components: 4 elements with 12 performance criteria, 8 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCPMS3031?

Auditori pulls the current release of CPCPMS3031 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCPMS3031 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCPMS3031 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCPMS3031, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your CPCPMS3031 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate CPCPMS3031 free