CPCCON3046 — Repair and rectify concrete
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for CPCCON3046 must cover
22 assessable components: 3 elements (12 performance criteria), 1 performance evidence and 9 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan and prepare to repair or rectify concrete.
- 1.1Assess concrete defect to determine possible causes and repair or rectification processes in consultation with relevant persons.
- 1.2Access and interpret manufacturer or engineer specifications associated with concrete repair or rectification work.
- 1.3Plan work tasks to comply with manufacturer or engineer specifications and relevant legislation, regulations, standards, codes, work health and safety (WHS), environmental and workplace requirements.
- 1.4Select tools and equipment, check for serviceability and rectify or report any faults.
- 1.5Select and fit required personal protective equipment (PPE).
- 1.6Inspect work site, assess hazards and apply risk controls including required signage and barricades.
- 1.7Calculate and acquire material quantities to meet task specifications and safely locate materials ready for use.
2 Carry out concrete repair or rectification activities.
- 2.1Use tools, equipment and materials for concrete repair or rectification activities safely in accordance with manufacturer and workplace requirements.
- 2.2Carry out concrete repair or rectification activities in accordance with engineer or manufacturer specifications and workplace requirements.
- 2.3Conduct checks to ensure concrete defect has been repaired or rectified and take actions required to meet engineer or manufacturer specifications and workplace requirements.
3 Clean up.
- 3.1Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.
- 3.2Clean, check, maintain and store tools and equipment in accordance with manufacturer and workplace requirements.
Performance evidence
- To demonstrate competency, a candidate must meet the elements and performance criteria of this unit by following manufacturer or engineer specifications to repair and rectify defects in a minimum of one square metre of concrete for each of the following: • three types of defects selected from the list below: • cracks less than 2 millimetres (mm) in width • broken edge off concrete • effects of dusting • damaged or blistered horizontal concrete • damage to vertical elements requiring feather coat to repair • floor that has been screeded out of tolerance and requires self-levelling compound to repair • one type of defect selected from the list below: • a live or dormant crack of between 2 mm and 10 mm in width • damaged concrete that needs to be cut out and replaced.
Knowledge evidence
- compliance requirements of legislation, regulations and Australian Standards relevant to concrete repair and rectification tasks: • environmental protection and waste disposal • specified tolerances • work health and safety (WHS)
- common defects in concrete and associated repair or rectification techniques and materials: • bonded toppings failure • cracks including wet, live and dormant • damaged or blistered concrete • effects of dusting • existing concrete toppings failure • levelling failure • non-bonding of new to old interfaces • non-compliant surfaces • oversized or undersized slabs • subsidence
- correct techniques for vibrating concrete including correct mixes for vertical elements
- correct positioning of reinforcement where applicable for different repair products including repair material bond to substrate, bonding to reinforcement and cover
- dust suppression methods to be used when repairing or rectifying concrete
- health risks associated with silica dust exposure
- possible causes of defects in concrete including chemical and physical influences: • cement hydration process • climate effects • concrete placement, finishing and curing • types and purpose of concrete additives
- types, characteristics, uses and limitations of tools, equipment and materials used when repairing and rectifying concrete
- workplace requirements for repairing and rectifying concrete: • cleaning up the work area • documentation and reporting • maintaining and storing tools and equipment • quality • safety requirements including personal protective equipment (PPE)
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing CPCCON3046
What does an assessment tool for CPCCON3046 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCON3046 needs to address all 22 unit components: 3 elements with 12 performance criteria, 1 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for CPCCON3046?
Auditori pulls the current release of CPCCON3046 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCON3046 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing CPCCON3046 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCON3046, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- CPCCON2021 — Handle concreting materials and components
- CPCCON2022 — Select, use and maintain concreting plant, tools and equipment
- CPCCON3035 — Determine concrete supply requirements
- CPCCON3036 — Plan concrete work and brief team
- CPCCON3041 — Place concrete
- CPCCON3042 — Finish concrete
- CPCCON3043 — Cure concrete
- CPCCON3044 — Apply decorative finishes to concrete
- CPCCON3047 — Cut concrete
- CPCCON3048 — Construct tilt panels on site
- CPCCON3049 — Apply and finish sprayed concrete
- CPCCON3050 — Carry out high-performance concreting
Your CPCCON3046 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate CPCCON3046 free