CPCCLRG3002 — Licence to perform rigging intermediate level
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for CPCCLRG3002 must cover
52 assessable components: 5 elements (25 performance criteria), 9 performance evidence and 17 knowledge evidence requirements, plus 1 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan task.
- 1.1Review task instructions, consult with relevant persons to seek clarification as required, and obtain relevant workplace information.
- 1.2Obtain and interpret information, including safe work method statements (SWMSs), required to ensure that activities are performed in compliance with workplace-specific and safe work requirements.
- 1.3Obtain and interpret information required to ensure that equipment inspection, use, maintenance and storage complies with manufacturer requirements.
- 1.4Identify workplace and task-specific hazards and determine required risk controls and safety measures and equipment, including signs and barricades, personal protective equipment (PPE), and fall prevention and fall arrest equipment.
- 1.5Identify methods of moving and placing tools, equipment and materials to minimise the risk of falling objects, to avoid inappropriate carrying on ladders and to minimise hazardous manual tasks.
- 1.6Identify required rigging equipment and associated gear.
- 1.7Calculate loads associated with mechanical load shifting equipment and associated gear required to erect and dismantle structures and plant.
- 1.8Establish required communication methods with relevant persons.
2 Select and inspect equipment.
- 2.1Select risk controls and equipment, including fall prevention and fall arrest equipment, and check that it is working and fit for purpose.
- 2.2Select and check PPE.
- 2.3Select rigging equipment and associated gear, inspect for defects, and isolate, tag out, report and record defective items.
- 2.4Select communication equipment and check that it is working and fit for use.
3 Set up task.
- 3.1Establish and maintain communication with relevant persons to ensure task plan and risk controls are communicated clearly, including any impact on other workplace activities.
- 3.2Ensure risk controls and safety measures and equipment have been put in place, including the fitting, adjusting and anchoring of fall protection equipment.
- 3.3Consult with relevant persons to ensure that ground and foundation have been assessed as suitable for task.
- 3.4Consult with relevant persons to ensure that the structure has been assessed as suitable for load bearing task.
4 Undertake intermediate rigging activities.
- 4.1Erect and dismantle all structures and operate plant while maintaining stability, in accordance with workplace and manufacturer requirements.
- 4.2Conduct a multiple-crane lift.
- 4.3Erect and dismantle one of the following: a tower crane section or a crane lattice boom section, or a fly jib on a mobile slewing or a non-guyed tower crane.
- 4.4Lift and install a series of tilt-up concrete panels.
- 4.5Remove a concrete-encased structural steel column and beam.
5 Complete task.
- 5.1Remove excess materials from work area.
- 5.2Inspect structures, plant, equipment and gear for defects, and isolate, tag out and report defective items.
- 5.3Store plant, equipment and gear in accordance with workplace requirements.
- 5.4Remove risk controls and safety measures and equipment.
Performance evidence
- undertaking a multiple-crane lift of a load of at least 1 tonne and at least 4 m long
- erect and dismantle one of the following: a tower crane section, crane lattice boom section, a fly jib on a mobile slewing, a non-guyed tower crane.
- installing and removing a three-panel structure, with each panel being at least 4 m high, at least 2 m wide and at least 1.5 tonnes
- using the following bends and hitches: round turn, two half-hitches.
- check relevant workplace information, including safe work method statements (SWMSs) and equipment service and maintenance records and checklists
- perform all activities in compliance with workplace-specific, safe work and manufacturer requirements
- identify hazards and use appropriate risk controls and safety measures and equipment
- use the following associated gear: tag lines, flexible steel wire rope (FSWR), chains, wire and synthetic slings, shackles, wedge sockets, eye bolts, rope grips, turnbuckles, chain blocks, sheaves, spreader bars or lifting beams, snatch blocks, lifting clutches
- safely erect and dismantle structures and plant.
Knowledge evidence
- safe work requirements for rigging under Australian Standards, and Commonwealth and state or territory work health and safety (WHS) legislation, regulations, standards and codes of practice
- workplace information, including legislative requirements covered by: SWMSs, permits and certifications
- information about equipment: service and maintenance checklists and records, manufacturer and supplier specifications and manuals
- workplace procedures, including emergency plans and incident reporting
- hazard identification and mitigation strategies, including the hierarchy of control: elimination, substitution, isolation, engineering controls, administrative controls, use of personal protective equipment (PPE)
- hazards commonly encountered in rigging intermediate level: instability of work areas, damaged or poor-quality equipment, overhead and underground hazards, electrical items, mobile plant, insufficient lighting, wind and other adverse weather conditions, traffic, pedestrian traffic, hazardous manual tasks, falling objects, falls from heights
- minimum clearance distance from powerlines or electrical equipment specific to mobile plant and scaffolding as determined by relevant state or territory authority or electrical supply authority
- risk controls and equipment: traffic barricades and control, pedestrian barricades, PPE, adequate illumination, safety structures and screens, exclusion zones
- inspection, handling and storage of rigging structures and equipment, associated gear, and other required equipment: rigging structures and equipment: concrete tilt-up panels, non-guyed light towers, scaffolds, elevated work platforms, personnel box, cantilevered crane loading platforms, mast climbers, safety screens and shutters, cranes
- associated gear: power and manually operated lifting gear, lifting clutches, snatch blocks, tag lines, FSWR, chains, wire and synthetic slings, shackles, terminations, wedge sockets, eye bolts, beam clamps, pipe clamps, plate clamps, wire rope grips, turnbuckles, rigging screws, chain blocks, lever blocks, lever-action winches, sheaves, spreader bars, lifting beams, jacks, levers, skates, wedges, rollers, beam trolley
- safety equipment: safety harness, energy absorber, lanyard, inertia reel, static safety lines
- PPE: hard hat, safety boots, gloves, high-visibility clothing, breathing, hearing, sight, skin and sun protection
- communication equipment: two-way radios, whistles
- relevant persons: doggers, riggers, load-shifting plant operators, engineers, supervisors
- ground and foundation suitability: rough, uneven ground, backfilled ground, soft soils, hard compacted soil, rock, bitumen, concrete, suspended concrete floors, building roofs, landings, ground bearing pressure
- mathematical processes for estimating and measuring forces and loads for intermediate rigging
- techniques for making temporary connections by tying bends and hitches: round turn, two half-hitches.
Foundation skills
- Foundation skills: Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing CPCCLRG3002
What does an assessment tool for CPCCLRG3002 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCLRG3002 needs to address all 52 unit components: 5 elements with 25 performance criteria, 9 performance evidence requirements, 17 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for CPCCLRG3002?
Auditori pulls the current release of CPCCLRG3002 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCLRG3002 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing CPCCLRG3002 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCLRG3002, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your CPCCLRG3002 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate CPCCLRG3002 free