CPCCDO3011 — Perform dogging
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for CPCCDO3011 must cover
39 assessable components: 5 elements (16 performance criteria), 2 performance evidence and 20 knowledge evidence requirements, plus 1 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan and prepare to perform dogging.
- 1.1Interpret work order and associated documentation and clarify requirements with relevant persons.
- 1.2Plan all work to comply with relevant legislation, regulations, standards, codes, work health and safety, environmental and workplace requirements.
- 1.3Select tools and equipment required for work tasks, check for serviceability and rectify or report identified faults.
- 1.4Confirm task sequencing schedule with relevant persons to ensure coordination.
- 1.5Calculate load mass and confirm using load charts and standard calculations.
- 1.6Calculate loads in slings and equipment to suit task requirements.
2 Sling load.
- 2.1Erect required safety signage and barricades and select and fit personal protective equipment (PPE).
- 2.2Assemble lifting devices and erect for load movement.
- 2.3Sling load to lifting device ready for lifting, using appropriate load slinging method.
3 Shift load.
- 3.1Shift load to ensure stability, in compliance with safe work method statement (SWMS).
- 3.2Direct load to landing position using appropriate communications in accordance with relevant Australian Standards and workplace requirements.
- 3.3Land load in required position on packing or bearers.
4 Remove dogging equipment from load.
- 4.1Dismantle load shifting equipment and inspect for wear. Complete required logbook and site records in accordance with workplace requirements.
- 4.2Dismantle load shifting equipment and inspect for wear. Complete required logbook and site records in accordance with workplace requirements.
5 Clean up.
- 5.1Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.
- 5.2Clean, check, maintain and store tools and equipment in accordance with manufacturer and workplace requirements.
Performance evidence
- one flexible load with a minimum of three lifting points
- one load out of sight of the lifting device operator
Knowledge evidence
- workplace and regulatory requirements for performing dogging under applicable Commonwealth, state or territory work health and safety (WHS) legislation, Australian Standards and codes of practice:
- job safety and environmental analyses (JSEAs)
- safe work method statements (SWMSs)
- safety data sheets (SDSs)
- safety manuals and instructions for plant, tools and equipment
- signage and barricades
- personal protective equipment (PPE)
- environmental and worksite safety plans
- reporting problems
- mathematical processes for calculating load mass
- assessment of weather and ground conditions relating to performing dogging
- types, characteristics, uses and limitations of dogging and lifting equipment
- load-slinging techniques
- dogging techniques
- safe working load tags
- lifting equipment operations and limitations
- signalling methods
- safe working at heights requirements and fall arrest systems
- processes for completion of logbooks and site records
- requirements for cleaning up work area, maintaining and storing tools, equipment and materials, and for environmentally friendly waste management
Foundation skills
- communication skills: interpret non-verbal communication such as hand signals
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing CPCCDO3011
What does an assessment tool for CPCCDO3011 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCDO3011 needs to address all 39 unit components: 5 elements with 16 performance criteria, 2 performance evidence requirements, 20 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for CPCCDO3011?
Auditori pulls the current release of CPCCDO3011 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCDO3011 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing CPCCDO3011 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCDO3011, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your CPCCDO3011 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate CPCCDO3011 free