CPCCDE3025 — Operate remote-controlled plant on demolition sites

1 Plan and prepare for work.

• 1.1Interpret and apply compliance requirements for remote-controlled plant demolition operations.
• 1.2Complete tasks according to manufacturer specifications and regulatory, legislative and workplace policies and requirements.
• 1.3Obtain work instructions from relevant information, confirm with team members and other relevant personnel, and apply to planning and preparation.
• 1.4Follow instructions and advice from structural engineer regarding load bearing capacities and demolition techniques on suspended floors.
• 1.5Identify and apply work health and safety (WHS) requirements to task planning according to safety plans.
• 1.6Identify environmental requirements for the project according to environmental plans.
• 1.7Identify, select and fit personal protective equipment (PPE).
• 1.8Check maintenance tools and equipment for serviceability and rectify and report faults.
• 1.9Conduct remote-controlled plant pre-start, start-up, park and shutdown operational checks.
• 1.10Check remote-controlled plant controls and functions, including brakes and manoeuvrability, for serviceability, and rectify and report faults.

2 Select, check and fit attachments.

• 2.1Select remote-controlled plant attachments to carry out tasks consistent with job requirements.
• 2.2Check attachments, arms and connections for excessive wear, and replace and report as required.
• 2.3Fit attachments securely according to safe work method and fit safety pins or clips.
• 2.4Check hydraulic components and rectify or replace faulty components and report actions.
• 2.5Test operation of hydraulic system before applying load.
• 2.6Test attachment operation by raising and lowering attachment and lock attachment in raised position for travel.
• 2.7Remove, clean and store attachments.

3 Prepare demolition site.

• 3.1Determine requirements of site demolition plan and discuss these with team members.
• 3.2Conduct site inspection of property or dilapidation survey to determine condition of worksite and surrounds before work begins and amend and seek approval of safe work method statement (SWMS) as required.
• 3.3Obtain confirmation from supervisor and regulatory authorities that all existing services have been disconnected.
• 3.4Identify hazardous material for separate handling.
• 3.5Position mechanical equipment and plant in operating locations and arrange appropriate exclusion zone and traffic control.

4 Operate remote-controlled plant loader for demolition process.

• 4.1Identify and apply remote-controlled plant operating techniques to achieve optimum output while achieving specified tolerances.
• 4.2Identify site hazards associated with remote-controlled plant demolition operations, including position of operator and personnel in relation to plant, equipment and environment and follow safe operating techniques to minimise risks.
• 4.3Move remote-controlled plant safely between work locations and observe relevant codes and traffic management requirements.
• 4.4Implement control measures to manage hazards arising from demolition process according to the demolition plan, safe work methods and regulatory requirements.
• 4.5Assess demolition tasks immediately prior to starting and review SWMS to incorporate management of previously unpredicted hazards.
• 4.6Operate remote-controlled plant at a safe distance to demolish building elements using suitable attachments according to approved demolition plan and current safe work method.
• 4.7Maintain communication with team members during the demolition process.
• 4.8Monitor worksite conditions and progress in consultation with team members and stop work or adjust techniques as required.

5 Carry out machine operator inspection and maintenance tasks.

• 5.1Carry out machine operator inspection and maintenance tasks.
• 5.2Carry out machine operator inspection and maintenance tasks.
• 5.3Carry out machine operator inspection and maintenance tasks.

6 Clean up work area.

• 6.1Clear work area and sort materials and waste and position for removal, as required, according to site demolition project environmental management plan.
• 6.2Clean, check, maintain and store maintenance tools and equipment.

What does an assessment tool for CPCCDE3025 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCDE3025 needs to address all 46 unit components: 6 elements with 35 performance criteria, 2 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCDE3025?

Auditori pulls the current release of CPCCDE3025 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCDE3025 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCDE3025 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCDE3025, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.