AVIC4002 — Administer airside driving
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AVIC4002 must cover
59 assessable components: 3 elements (7 performance criteria), 18 performance evidence and 34 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Test applicants to drive airside
- 1.1Airside driving tests are administered and results are recorded in accordance with established procedures
- 1.2Documentation is issued to appropriate authorities as required and recorded
2 Administer and issue vehicle permits
- 2.1Permit is issued in accordance with aerodrome procedures
- 2.2Conditions of use of permit are explained to applicant
3 Investigate airside driving incidents
- 3.1Reports on incidents and accidents are prepared and appropriate safety management is actioned
- 3.2Airside driving procedures and rules are reviewed
- 3.3Recommendations for safety improvements are made to aerodrome management
Performance evidence
- applying precautions and required action to minimise, control or eliminate identified hazards
- applying relevant legislation and workplace procedures
- communicating effectively with others
- completing relevant documentation
- identifying and correctly using relevant equipment
- implementing contingency plans
- implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations
- investigating airside driving incidents
- modifying activities depending on workplace contingencies, situations and environments
- monitoring and anticipating operational problems and hazards and taking appropriate action
- monitoring work activities in terms of planned schedule
- operating electronic communications equipment to required protocol
- reading, interpreting and following relevant regulations, instructions, procedures, information and signs
- reporting and/or rectifying identified problems promptly in accordance with regulatory requirements and workplace procedures
- selecting and using required personal protective equipment (PPE) conforming to industry and WHS/OHS standards
- testing and administrating airside driving applicants
- working collaboratively with others
- working systematically with required attention to detail without injury to self, others, or damage to goods or equipment
Knowledge evidence
- braking and safety system procedures
- cleaning requirements
- communications equipment checks
- controls, instruments and indicators and their purpose, location and use
- emergency procedures
- external features of equipment that must be checked during a pre-operational visual inspection
- fuel tank capacity and range
- functions of all supervisory indicators and controls and related checks for correct operation
- functions of ancillary systems and related checks for correct operation
- lubrication requirements
- Part 139 Manual of Standards - Aerodromes
- operating controls
- operating procedures
- pre-operational checks
- principles, purpose and location of controls, monitoring devices and systems
- procedures for adjusting controls to optimise equipment operation
- procedures for checking fluid levels and carrying out lubrication processes
- procedures for identifying equipment defects and assessing for appropriate action
- procedures for managing and controlling hazardous situations when carrying out work activities
- procedures for operating electronic communications equipment
- procedures for servicing and minor maintenance
- procedures for starting and operating ancillary systems
- reading, interpreting and following relevant regulations, instructions, procedures, information and signs
- relevant sections of state/territory and national legislation, operating standards and codes of practice
- relevant WHS/OHS and environmental procedures and regulations
- relevant licensing authority licence requirements
- relevant sections of Civil Aviation Safety Regulations (CASRs) and Civil Aviation Orders
- relevant sections of the current Transport Safety Investigation Act for reporting transport safety matters
- requirements for completing relevant documentation
- sources of information on differences in equipment and related standard operating and servicing procedures
- start-up procedures
- steps involved in planning work activities
- typical defects that can occur and related action that should be taken
- visual inspection procedures
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AVIC4002
What does an assessment tool for AVIC4002 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AVIC4002 needs to address all 59 unit components: 3 elements with 7 performance criteria, 18 performance evidence requirements, 34 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AVIC4002?
Auditori pulls the current release of AVIC4002 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AVIC4002 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AVIC4002 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AVIC4002, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AVIC4002 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AVIC4002 free