AURVTP117 — Rectify and touch up vehicle paint faults using clear over base two-pack systems

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AURVTP117 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AURVTP117 must cover

32 assessable components: 4 elements (14 performance criteria), 3 performance evidence and 9 knowledge evidence requirements, plus 6 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for work

1.1Identify job requirements from workplace instructions
1.2Identify hazards associated with the work, assess potential risks and implement control measures in line with workplace policies and procedures
1.3Identify tools, equipment and chemicals required for repair activity and establish serviceability according to workplace procedures

2 Identify paint fault, its cause and rectification requirements

2.1Identify cause of paint fault from paint manufacturer information and confirm with appropriate personnel
2.2Inspect visually inspect faulty paintwork according to workplace procedures
2.3Assess damage to paintwork through visual comparison with undamaged paintwork
2.4Identify fault rectification requirements according to manufacturer and workplace procedures

3 Rectify and touch-up paint faults

3.1Identify materials required to restore paintwork to pre-damage condition from paint manufacturer recommended procedures
3.2Measure, mix and apply materials using approved equipment
3.3Rectify and blend damaged paintwork with existing paintwork using COB two-pack system and blending and drying techniques according to workplace procedures
3.4Complete rectification processes according to workplace procedures

4 Complete work processes

4.1Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
4.2Clear work area and dispose of or recycle materials according to workplace procedures
4.3Complete documentation according to workplace procedures

Performance evidence

rectify and touch up faults on at least three different vehicles using clear over base (COB) two-pack paint materials
using partial blend and fade-out blend on at least one vehicle
blending and clearing panels on at least one vehicle

Knowledge evidence

methods to locate and interpret information required to rectify and touch up vehicle paint faults using clear over base two-pack systems, including: paint manufacturer specifications and paint codes paint technical data sheets paint safety data sheets (SDS)
workplace procedures required to rectify and touch up vehicle paint faults using clear over base two-pack systems including: establishing the serviceability of tools and equipment documentation procedures housekeeping procedures including: examination of tools and equipment storage of equipment identification, tagging and isolation of faulty equipment disposal of excess materials recycling procedures
workplace health and safety (WHS) requirements relating to rectifying and touching up vehicle paint faults using clear over base two-pack systems, including procedures for: selecting and using personal protective equipment (PPE) using technical data sheets (TDS) and safety data sheets (SDS) for COB two-pack paint handling and storing paint materials using tools and equipment
environmental requirements relating to rectifying and touching up vehicle paint faults using clear over base two-pack systems, including procedures for trapping, storing and disposing of waste materials
types and use of refinishing materials, including: solvent base coats and clear coats water-based materials paint thinners and hardeners polishing materials
types and use of painting equipment, including: types of spray guns and maintenance requirements spray gun set-up, use and maintenance correct use of positive air feed masks using approved drying area tinting systems cleaning equipment
paint rectification and touch-up techniques and procedures, including: identifying paint surface faults surface preparation methods paint mixing procedures COB two-pack paint application methods paint drying methods
procedures for protecting vehicle and components when rectifying and touching up paint
procedures for final inspection of paint rectification and touch-up work using COB two-pack systems

Foundation skills

Learning: Locates required sources of information efficiently.
Reading: Interprets workplace instructions such as job cards Organises and interprets technical information from workplace procedures, manufacturer specifications, industry standards and paint technical data sheets (TDS) and safety data sheets (SDS).
Oral communication: Clarifies instructions and procedures Reports quality issues and job outcomes clearly.
Numeracy: Identifies paint specification codes Uses basic mathematical operations, including addition, subtraction, multiplication and division to: calculate and measure quantities of paint and materials determine ratios for mixing paint calculate and set paint drying times Sets spray painting air pressure and spray booth temperatures Sets paint measuring system.
Planning and organising: Plans own work requirements Prioritises actions to achieve required outcomes Ensures tasks are completed within workplace timeframes.
Technology: Uses specialist tools and equipment.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AURVTP117

What does an assessment tool for AURVTP117 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURVTP117 needs to address all 32 unit components: 4 elements with 14 performance criteria, 3 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AURVTP117?

Auditori pulls the current release of AURVTP117 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURVTP117 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AURVTP117 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURVTP117, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AURVTP117 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AURVTP117 free