AURTTW001 — Carry out soft soldering techniques
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AURTTW001 must cover
24 assessable components: 3 elements (13 performance criteria), 1 performance evidence and 4 knowledge evidence requirements, plus 6 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to carry out soft soldering
- 1.1Job requirements are determined from workplace instructions
- 1.2Soft soldering procedures and information are sourced and interpreted
- 1.3Repair options are analysed and those most appropriate to the circumstances are selected
- 1.4Hazards associated with the work are identified and risks are managed
- 1.5Materials, tools and equipment are selected and checked for serviceability
- 1.6Personal protective equipment (PPE) is chosen and prepared according to workplace procedures and safety requirements
- 1.7Components and materials to be soft soldered are cleaned and prepared according to workplace and safety requirements
2 Carry out soft soldering
- 2.1Soldering is carried out using correct and appropriate techniques, including appropriate use of flux, according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components, systems or equipment
- 2.2Soldered joint is tested using appropriate techniques and equipment to ensure compliance with manufacturer specifications
3 Complete work processes
- 3.1Final inspection is made to ensure work is to workplace expectations and component or vehicle is presented ready for use
- 3.2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
- 3.3Tools and equipment are checked and stored according to workplace procedures
- 3.4Workplace documentation is processed according to workplace procedures
Performance evidence
- carry out soft soldering to repair: • a radiator or fuel tank using a soldering iron • a radiator using a direct flame.
Knowledge evidence
- work health and safety (WHS) and occupational health and safety (OHS) requirements relating to soft soldering, including procedures for working with: • cleaning and heating equipment • corrosive fluxes • volatile liquids and fumes
- environmental requirements, including procedures for trapping, storing and disposing of waste produced during soft soldering process
- soft soldering procedures, including: • component cleaning and preparation • types and applications of fluxes • methods of applying heat, including: • soldering irons • direct flame
- soft soldering testing procedures, including pressure testing.
Foundation skills
- Learning skills to:: locate appropriate sources of information efficiently.
- Reading skills to:: interpret safe operating procedures for soft soldering equipment from workplace and manufacturer literature interpret information from manufacturer and workshop literature when seeking component specifications.
- Writing skills to:: legibly and accurately fill out workplace documentation when recording parts and material used.
- Oral communication skills to:: clarify instructions.
- Numeracy skills to:: measure components and use basic mathematical operations to calculate distances, tolerances and deviations from manufacturer specifications.
- Planning and organising skills to:: plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed within workplace timeframes.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AURTTW001
What does an assessment tool for AURTTW001 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURTTW001 needs to address all 24 unit components: 3 elements with 13 performance criteria, 1 performance evidence requirements, 4 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AURTTW001?
Auditori pulls the current release of AURTTW001 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURTTW001 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AURTTW001 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURTTW001, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AURTTW001 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AURTTW001 free