AURTTD004 — Inspect and service suspension systems
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AURTTD004 must cover
26 assessable components: 4 elements (13 performance criteria), 1 performance evidence and 7 knowledge evidence requirements, plus 5 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to inspect and service suspension system
- 1.1Job requirements are determined from workplace instructions
- 1.2Servicing information is sourced and interpreted
- 1.3Hazards associated with the work are identified and risks are managed
- 1.4Tools, equipment and materials are selected and checked for serviceability
2 Inspect suspension system
- 2.1Inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements
- 2.2Inspection results are compared with manufacturer specifications
- 2.3Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
3 Service suspension system
- 3.1Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
- 3.2Post-service testing is carried out according to workplace procedures
4 Complete work processes
- 4.1Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
- 4.2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
- 4.3Tools and equipment are checked and stored according to workplace procedures
- 4.4Workplace documentation is processed according to workplace procedures
Performance evidence
- inspect and service the front and rear suspension systems of two different vehicles or machinery.
Knowledge evidence
- work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting and servicing suspension systems, including procedures for: - working with stored energy - isolating and stabilising vehicles and machinery
- environmental requirements, including procedures for trapping, storing and disposing of lubricants and fluids released from suspension systems
- identification, function and basic operation of major front and rear suspension components, including: - spring types and dampers - suspension arms - suspension components
- types and applications of lubricants and fluids
- inspection procedures for suspension systems, including: - analysing component wear - checking fluid and air leaks - evaluating physical damage
- service and adjustment procedures for suspension systems, including: - adjusting and replenishing oil and fluid levels as required - lubricating components
- post-service testing procedures for suspension systems.
Foundation skills
- Learning skills: locate appropriate sources of information efficiently.
- Reading skills: interpret information from manufacturer and workshop literature when seeking service procedures and specifications relating to suspension systems.
- Writing skills: legibly and accurately fill out workplace documentation when reporting inspection findings, making recommendations, and recording parts and material used.
- Oral communication skills: clarify instructions report inspection findings and make repair recommendations.
- Numeracy skills: use basic mathematical operations, including addition and subtraction, to compare component wear to distances, tolerances and deviations in manufacturer specifications.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AURTTD004
What does an assessment tool for AURTTD004 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURTTD004 needs to address all 26 unit components: 4 elements with 13 performance criteria, 1 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AURTTD004?
Auditori pulls the current release of AURTTD004 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURTTD004 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AURTTD004 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURTTD004, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AURTTD004 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AURTTD004 free