AURMTA102 — Assemble and prepare competition vehicles for motor sport events

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AURMTA102 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AURMTA102 must cover

57 assessable components: 8 elements (38 performance criteria), 1 performance evidence and 13 knowledge evidence requirements, plus 5 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Collect event category information and analyse assembly requirements

1.1Determine job requirements from event category information and workplace instructions
1.2Check vehicle operating conditions and seek clarification of specifications as required
1.3Source and interpret methods for assembly and preparation and select those required for the circumstances
1.4Propose modifications or adaptation of equipment as required
1.5Prepare component requirements list and communicate to required persons
1.6Determine procedures for minimising waste material

2 Prepare work area and equipment

2.1Source and check tools and equipment for safe and effective operation
2.2Clean and lay out work area for job requirements according to work safety requirements and team procedures
2.3Identify hazards associated with the work and manage risks
2.4Report problems with work area or operation of equipment to persons according to team procedures

3 Prepare components for assembly

3.1Source and interpret assembly procedures and information
3.2Clean components to facilitate pre-assembly inspection according to team procedures and safety and environmental requirements, and without causing damage to components
3.3Inspect components for function and quality to ensure optimum use of resources
3.4Report problems with components to persons according to team procedures as required

4 Install sub-assemblies

4.1Inspect sub-assemblies for quality and readiness for installation according to manufacturer specifications
4.2Install sub-assemblies and tension fasteners according to safety requirements and manufacturer installation sequences and techniques
4.3Make checks to ensure accurate and complete fitting according to team procedures and manufacturer specifications
4.4Report problems with sub-assemblies to persons according to team procedures as required

5 Install ancillary systems

5.1Locate critical components according to function, susceptibility to damage, and ease of maintenance
5.2Install critical components and tension fasteners according to team procedures and manufacturer specifications
5.3Confirm optimum layout for wiring loom, connectors, hoses, hard lines and ancillary components
5.4Install wiring loom, connectors, hoses, hard lines and ancillary components and tension fasteners according to manufacturer specifications, team procedures and safety requirements
5.5Secure entire installation and shield to maximise reliability and minimise susceptibility to damage according to manufacturer specifications, team procedures and safety requirements
5.6Make checks during and after installation to ensure accurate and complete fitting according to team procedures and manufacturer specifications
5.7Report problems with components to persons according to team procedures as required

6 Conduct post-assembly checks

6.1Check and top up vehicle fluid levels as required according to team procedures and manufacturer specifications
6.2Remove temporary bungs and covers and conduct engine pre-start checks
6.3Check sub-assemblies and ancillary systems for operation

7 Set vehicle baseline configuration

7.1Determine vehicle baseline settings from team instructions, category regulations, and component supplier specifications
7.2Establish level surface on which to place vehicle for set-up
7.3Install springs and dampers according to manufacturer specifications, team procedures and safety requirements
7.4Measure and adjust ride height and corner weight as required and according to manufacturer specifications, team procedures and safety requirements
7.5Measure and adjust steering angles as required and according to manufacturer specifications, team procedures and safety requirements
7.6Report potential or existing problems to persons according to team procedures as required

8 Complete work processes

8.1Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
8.2Clear work area and dispose of or recycle materials according to workplace procedures
8.3Check and store tools and equipment, and pack and store surplus components and consumables according to workplace procedures
8.4Complete documentation according to workplace procedures

Performance evidence

assemble and prepare at least two different competition vehicles in which the work must involve each of the following: installing body, mechanical and electrical systems; installing fluid or pneumatic and fire systems.

Knowledge evidence

methods to locate and interpret information required to assemble and prepare competition vehicles for motor sport events, including: information provided by customer and supervisors; manufacturer specifications and procedures or equivalent documentation, including: allowable design; quality; materials, equipment, and quantities; event category information, including: supplementary regulations
workplace procedures required to assemble and prepare competition vehicles for motor sport events including: establishing serviceability of tools and equipment; documentation procedures; housekeeping procedures, including: examination of tools and equipment; storage of equipment; identification, tagging and isolation of faulty equipment; disposal of excess materials; recycling procedures
work health and safety (WHS) requirements relating to assembling and preparing competition vehicles, including procedures for: selecting and using personal protective equipment (PPE) when assembling competition vehicles; using chemical cleaning and lubricating agents; methods of panel creation and their processes
environmental requirements, including procedures for trapping, storing and disposing of chemicals and fluids released during assembly process
details of competition vehicle design, quality, and material, equipment and quantities in team instructions, supplementary regulations and manufacturer specifications
typical stages of competition vehicle assembly
procedures for setting up work area and component layout
component cleaning and inspection procedures
procedures for assembling and installing sub-assemblies and ancillary systems, including: sub-assembly and ancillary system installation sequence and techniques; optimum layout for conduits and ancillary components; types of securing devices and securing methods; types of shielding devices and shielding methods; procedures for checking fitting of sub-assemblies and ancillary systems
post-assembly checking procedures, including: checking and topping up fluid levels; engine pre-start checks, including: abnormal noise; leaks; pressures; temperatures; measuring pressures, temperatures, noise and checking for leaks of components; checking correct operation of sub-assemblies and ancillary systems
procedures for establishing vehicle baseline configuration
procedures for installing springs and dampers and measuring and adjusting ride height and corner weight
procedures for measuring and adjusting steering angles

Foundation skills

Learning: Locates required sources of information efficiently.
Numeracy: Measures components and uses basic addition, subtraction, division and multiplication, to calculate tolerances and clearances Uses basic mathematical operations to calculate volume and area.
Oral communication: Clarifies instructions Reports problems with the work area, the operation of the equipment, or components and sub-assemblies.
Reading: Interprets team instructions, supplementary regulations and manufacturer specifications.
Problem solving: Determines assembly sequence and avoids backtracking or workflow interruptions.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AURMTA102

What does an assessment tool for AURMTA102 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURMTA102 needs to address all 57 unit components: 8 elements with 38 performance criteria, 1 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AURMTA102?

Auditori pulls the current release of AURMTA102 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURMTA102 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AURMTA102 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURMTA102, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AURMTA102 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AURMTA102 free