AURJTJ003 — Remove and refit motorcycle wheel and tyre assemblies
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for AURJTJ003 must cover
26 assessable components: 4 elements (15 performance criteria), 1 performance evidence and 4 knowledge evidence requirements, plus 6 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to remove wheel and tyre assembly
- 1.1Environmental and safety requirements are sourced and interpreted
- 1.2Task instruction is interpreted and wheel and tyre assembly to be worked on is identified
- 1.3Manufacturer specifications for removing and replacing wheel and tyre assembly are sourced and interpreted
- 1.4Potential hazards and risks associated with task are identified and reported to workplace supervisor
- 1.5Tools and equipment required for removing and replacing wheel and tyre assembly are identified and checked for serviceability
2 Remove wheel and tyre assembly
- 2.1Motorcycle is prepared for wheel removal according to workplace procedures and safety requirements
- 2.2Wheel and tyre assembly is removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment
- 2.3Wheel and tyre assembly is identified according to manufacturer specifications
3 Refit wheel and tyre assembly
- 3.1Wheel and tyre assembly is prepared for replacement
- 3.2Wheel and tyre assembly is replaced according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment
- 3.3Wheel and tyre assembly on motorcycle is checked for correct operation
4 Complete work processes
- 4.1Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use
- 4.2and recyclable material is collected
- 4.3Tools and equipment are checked and stored according to workplace procedures
- 4.4Workplace documentation is processed according to workplace procedures
Performance evidence
- remove, refit and adjust the front and rear wheel assemblies of one motorcycle.
Knowledge evidence
- work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and refitting motorcycle wheel and tyre assemblies, including procedures for using: safety glasses, ear protection and safety footwear; motorcycle lifting and supporting equipment; motorcycle wheel assembly removal and refitting equipment
- types of motorcycle wheels and tyres
- types and applications of motorcycle drives, including: chain drive; belt drive; driveshaft drive systems
- procedures for removing and refitting motorcycle wheel and tyre assemblies, including: axle nut tensioning; drive chain tensioning; post-fitting procedures and checks of motorcycle wheel assemblies, including wheel and tyre assembly alignment.
Foundation skills
- Learning skills: locate appropriate sources of information.
- Reading skills: interpret key information from manufacturer literature when seeking tyre, wheel specifications, including tightening procedures.
- Writing skills: legibly and accurately fill out workplace documentation using correct industry terminology and conventions
- Oral communication skills: participate effectively in verbal exchanges using questioning and active listening to request, clarify and clearly convey information.
- Numeracy skills: interpret numerical information on tyre inflation gauges.
- Technology skills: operate wheel and tyre assembly removal, refitting and adjustment tools and equipment.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing AURJTJ003
What does an assessment tool for AURJTJ003 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AURJTJ003 needs to address all 26 unit components: 4 elements with 15 performance criteria, 1 performance evidence requirements, 4 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for AURJTJ003?
Auditori pulls the current release of AURJTJ003 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AURJTJ003 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing AURJTJ003 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AURJTJ003, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your AURJTJ003 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate AURJTJ003 free