Auditori
Get started

AUMGTM008 — Bond and repair fibreglass components

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate AUMGTM008 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for AUMGTM008 must cover

31 assessable components: 3 elements (14 performance criteria), 6 performance evidence and 4 knowledge evidence requirements, plus 7 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan the job

  • 1.1Items to be bonded and repaired are identified from work orders
  • 1.2FRP materials and equipment are identified, selected and prepared
  • 1.3Component surface area is calculated and FRP materials are prepared
  • 1.4Required quantities of gel-coat, resins, catalyst and matting are calculated
  • 1.5Correct set-up and facilities of ventilated work area are confirmed and faults and non-compliances are reported

2 Bond and repair components

  • 2.1Workplace procedures are identified and followed
  • 2.2FRP edges and surfaces are prepared according to workplace procedures
  • 2.3FRP materials are mixed in approved containers
  • 2.4FRP materials are applied according to workplace procedures
  • 2.5Components are finished according to workplace quality procedures

3 Complete work processes

  • 3.1Equipment is cleaned and stored according to workplace procedures
  • 3.2Work area is cleaned, and waste materials are disposed of or recycled according to workplace procedures
  • 3.3Completed FRP component is checked against job specifications
  • 3.4Workplace documents are completed according to procedures

Performance evidence

  • interpret bonding and repair requirements from work sheets
  • calculate surface areas and FRP materials
  • prepare surfaces for FRP activities
  • mix and apply FRP materials according to specifications, work health and safety (WHS) requirements and workplace procedures
  • bond and repair components according to WHS and environmental requirements
  • finish FRP surface to job specifications according to WHS and environmental requirements

Knowledge evidence

  • WHS and environmental requirements relating to bonding and repairing fibreglass components, including relevant personal protective equipment (PPE)
  • procedures for measuring and calculating FRP-related requirements
  • types and applications of FRP composite materials
  • FRP bonding, repair and surface finishing procedures for fibreglass components

Foundation skills

  • Reading skills: interpret work health and safety (WHS) and workplace procedures, job instructions and component specifications; interpret safety data sheets (SDS); information about FRP application processes.
  • Writing skills: legibly complete faulty equipment tags; complete work sheets and FRP materials list; prepare an FRP repair plan.
  • Oral communication skills: use FRP terminology in the workplace; report faulty FRP application equipment.
  • Numeracy skills: calculate and record surface area; calculate and record required FRP materials, quantities and percentages; identify component specifications; identify part numbers.
  • Digital literacy skills: use digital scales; use workplace computer systems.
  • Planning and organising skills: prepare FRP application equipment, materials and work area; ensure FRP materials are correctly calculated and identified.
  • Problem-solving skills: resolve FRP problems and meet job outcomes; interpret and apply work instructions to ensure FRP materials are correctly mixed.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing AUMGTM008

What does an assessment tool for AUMGTM008 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for AUMGTM008 needs to address all 31 unit components: 3 elements with 14 performance criteria, 6 performance evidence requirements, 4 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for AUMGTM008?

Auditori pulls the current release of AUMGTM008 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for AUMGTM008 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing AUMGTM008 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of AUMGTM008, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your AUMGTM008 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate AUMGTM008 free